If the sound on your Mac has stopped working, there are a number of possible explanations and solutions. The first thing to check is that the sound definitely is not working. Sound recorder full version. Below we'll explain what to check.
- Mac Multi Output Device Volume Control
- Multi Output Device Mac Volume
- Volume Control On Multi Output Device For Mac Windows 10
- Mac Control Monitor Volume
- Volume Control On Multi Output Device For Macbook Pro
- Volume Control On Multi Output Device For Mac Computer
- Multi Output Device Mac Volume Control
While you are at it, take a look at the volume bar below and make sure that your output volume is turned up and Mute is unchecked. This should restore audio to your native Mac speakers. Jun 07, 2012 in fact, i would reccomend this in the first place regardless of pc, if you didnt need a variable volume control in one zone. It has a tiny volume dial in the back for each speaker, so its more of a set and forget volume control. On the PC, use a piece of software called j.river media center.
No sound on Mac? Check these things first
1. Check the volume
As simplistic as it may seem, the first thing to check is that the volume hasn’t been muted intentionally. Tap the volume up (F12) key to turn up the sound level. Springfield m1a super match serial numbers.
Pro tip: If you hold down Option+Shift when you press F12 or F11 to increase or decrease the volume, it will move in smaller increments than the full step changes that occur when you use the keys on their own.
2. Is it an app problem?
It may be that there’s no sound on your Mac because it won’t play audio in a specific app. If, for example, you can’t hear sound from a video in Safari, make sure the audio isn’t muted, by clicking the volume control in the video. You should also check other sound sources, like iTunes and QuickTime movies to find out if they can play sound.
Tip: if you’re fed up with websites you visit automatically playing video with sound when you’re working, go to Safari>Preferences and click the Websites tab. Click Autoplay, and in the bottom right of the window, choose Stop Media with Sound.
3. Check for hardware issues
Next, check there’s nothing plugged into the headphone/line out port and look to see if there’s a red light on that port. If there is, it could be there’s a problem with the port, or something blocking it. Try blowing on it to clear dust, if that’s the case.
4. Are you running the latest version of macOS?
![Volume Volume](https://www.switchingtomac.com/wp-content/uploads/2019/10/use-default-speakers.png)
If there’s still no sound on your Mac, Apple’s advice is that the first thing you should do is make sure you’re running the latest version of macOS.
To check which version of macOS your Mac is running, click the Apple menu and then About this Mac. The window that opens will have the name of the version of macOS currently installed at the top. Now the latest version is macOS High Sierra. If you’re not running High Sierra, you should consider installing it by going to the App Store app, and clicking on it in the sidebar on the right hand side of the main window.
If you don’t want to install High Sierra, at least make sure you’re running the latest update to whichever version of the OS is installed. To check that, click Software Update in the About this Mac window. That will check for updates and let you know if there’s one available. If there is, install it.
Mac Multi Output Device Volume Control
Before you install either a new version of the OS or an update, backup your Mac using Time Machine, or whichever backup tool you normally use.
5. Run Maintenance scrips
If you’ve determined your Mac’s sound definitely isn’t working, consider running CleanMyMac X’s Maintenance scripts. These optimize the performance of your Mac by running a number of routines such as repairing disk permissions, verifying your startup disk, and rebuilding the launch services database.
Here's how to run Maintenance scrips:
Download CleanMyMac X here (it's free to download).
Multi Output Device Mac Volume
- Launch the app.
- Click Maintenance.
- Choose Run Maintenance Scripts and click Run.
Following this link, you can get CleanMyMac at 20% off.
How to check your sound settings
If you’re running the latest version of macOS and your sound still isn’t working, the next step is to check your Sound settings.
- Click on the Apple menu and choose System Preferences.
- Click on the Sound pane.
- Select the Output tab and choose Internal Speakers. If that’s not available as an option, contact Apple Support.
- Check if the volume slider is low, if so slide it to the right and check the sound again.
- Make sure the Mute box isn’t checked.
If, when you check your sound settings, you see a USB device selected rather than Internal Sound, and you can’t change it, disconnect all USB devices from your Mac and try again.
Is there an app interfering with the sound?
Some applications, like screen recorders, install their own audio output drivers so that when you record the screen you can direct your Mac’s output to the recording app. It’s possible that if you’ve installed an app like that, its driver could be interfering with your Mac’s sound output.
- Go to System Preferences and choose Sound.
- Click on the Output tab.
- If there’s an output option that looks like a software app and it’s selected, that may be why the sound is not working on your Mac.
The best thing to do in that instance is to uninstall the app. You could just drag the app to the Trash, but that won’t uninstall it properly or remove all the files the app has placed on your Mac. To do that, you should use a dedicated uninstaller like CleanMyMac X.
CleanMyMac makes it very easy to completely uninstall any app so that it doesn’t leave any fragments or stray files behind. By using CleanMyMac, you can be sure you’ve deleted all the files associated with the app and that it hasn’t left anything behind. You can download CleanMyMac for free here.
Restart the sound controller
If there are no software audio drivers interfering with your Mac’s sound output, nothing plugged into the headphone jack, USB, or Thunderbolt ports, and your sound still doesn’t work, the next step is to restart the sound controller. This requires launching Activity Monitor and quitting a process, but don’t worry, it’s not too scary!
- Go to Applications>Utilities and double-click on Activity Monitor to launch it.
- In the search bar, type 'coreaudiod’ to locate the Core Audio controller.
- Click on coreaudiod, then click ‘X’ in the tool bar to quit it.
- Coreaudiod will restart.
Mac volume not working and stuck on mute?
If the volume control is not working on your Mac, either using the keyboard or the slider in the menu bar or System Preferences, it could be ’stuck’ on mute. The most common occurrence of this problem is on pre-2015 Macs that had a digital audio output support in the headphone jack.
On those Macs, there was a sensor in the port that detected whether a headphone jack or a digital audio device was plugged in. The Mac would then change the output to headphones or digital output accordingly. However, sometimes the sensor failed to recognise when a digital audio device had been unplugged and so the audio output remained locked on digital output, with no way to change it. With no digital audio output connected, there is no way to change the volume or hear sound.
The solution in that case is to plug the cable back in to the socket and remove it again. Try it a few times, if necessary, to ‘trip’ the sensor and make the Mac recognise the digital audio device is no longer connected. If that doesn’t work, there could be some gunk blocking the socket. Try blowing on it to remove any dust. If that doesn’t work, buy a can of compressed air and, carefully, spray the socket to bow out the dust.
If that still doesn’t do the trick, buy a foam-tipped swab (don’t use a cotton bud as these leave tiny threads behind) and dip it in rubbing alcohol. Put the swab into the headphone jack and clean it, wiping away as much of the link as possible.
Bluetooth sound not working on Mac
Your Mac can play audio wirelessly via Bluetooth, so if you have Bluetooth speakers or headphones, you can use those to listen to music, or anything else on your Mac. Sometimes, however, they don’t work.
Make sure Bluetooth is switched on.
- Go to System Preferences and click the Bluetooth pane.
- If it says Bluetooth turned off, turn it on.
Make sure your headphones or speakers are connected.
- Look in the list of devices in the main window to see if your headphones or speakers are listed.
- If not, put them in pairing mode (you’ll need to refer to their instructions to find out how to do that) and when they appear, click Connect.
- If they are listed but not connected, make sure they’re switched on and Control-click on them in the main window and choose Connect.
![Multi Multi](https://cloud.addictivetips.com/wp-content/uploads/2019/10/volume-for-Multi-output-Audio-devices.jpg)
Tip: If you check the box labelled Show Bluetooth in menu bar in Bluetooth preferences, you can connect from the menu bar item.
Once your headphones or speakers are connected, click on the volume control in the menu bar and choose them. If you don’t have the volume control displayed on the menu bar, go to System Preferences, choose Sound and then the Output tab and select the Bluetooth speaker or headphones. While you’re there, it’s a good idea to check the box labelled Show volume in menu bar — it’s in the Sound Effects tab.
To conclude, there are a number of reasons why the sound is not working on your Mac. If you follow the guide above and take it one step at a time, you should be able to fix the problem. If none of the steps above work for you, the next step is to contact Apple support and, if possible, make an appointment at the Genius Bar of an Apple Store. If that’s not possible, Apple will advise you on the best course of action to get your audio working again.
These might also interest you:
Your Mac's Sound Preference Pane is the go-to place for choosing audio inputs and outputs, but it isn't the only place you can go in OS X to manage your Mac's sounds. Even though Audio MIDI Setup may sound intimidating, it's loaded with controls that go far beyond what its name implies and can help you fine tune the audio quality your Mac pumps out.
You can find the Audio MIDI Setup app tucked away in Applications > Utilities. Once launched, you can choose any audio input or output available and make adjustments that go beyond the basic features in the Sound Preference Pane.
My MacBook Pro, for example, has the usual built-in speakers for output, but I also have Audioengine's D3 DAC connected to a USB port. It's a 24-bit digital-to-analog converter that gives me much better audio than my Mac's built-in audio chip can manage. I can set my audio sample rate to 44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz -- but only from Audio MIDI Setup.
Audio MIDI Setup lets you control sample rates for your speakers and mics
You can set the sample rate for audio output devices by first selecting the device from the left-side column, and then clicking the Output tab. Now use the Format pop-up menu to choose the sample rate you want. Higher is generally better, but don't bother to choose a setting that's beyond quality you can hear; if it doesn't sound better to you, don't bump the sample rate up, and there's no point in wasting processor time on something that isn't giving you audio quality beyond what you can hear.
Some audio outputs support multichannel. You can set that by clicking Configure Speakers, and then choosing Stereo or Multichannel. Use Stereo for 2-speaker setups, and Multichannel for surround sound setups.
Volume Control On Multi Output Device For Mac Windows 10
You can set panning for multi-channel speaker setups
Every speaker connected to that output will appear, and you can assign specific channels to exactly the speaker you want. From here, you can also drag the blue dot to set panning.
I set my D3 to 88.2 kHz because that sounds great with my Audioengine A5+ speakers. Yep, I'm a little spoiled with my Mac's audio setup.
You can set the sample rate for input devices, such as microphones, from Audio MIDI Setup, too. My Rode Podcaster mic is set to 44.1 kHz because I use it to record my speaking voice. No surprise there considering I spend so much time recording podcasts.
Mac Control Monitor Volume
There are a couple buttons tucked away at the bottom of the device list. The plus button lets you create Multi-Output Devices -- or groups of outputs that act as a set of speakers. I set up one that includes my D3 and AirPlay so I can play the same audio at my desk and through my home entertainment center. Think of it as a poor man's Sonos in that you can play the same music through speakers in different parts of your home or office simultaneously.
You can group outputs together to play audio simultaneously through multiple speaker sets
Volume Control On Multi Output Device For Macbook Pro
Aggregate Devices, also available from the plus button, let you group together audio outputs to create your own multi-channel system from speakers you already own. Multi-Output and Aggregate devices show up in the Sound Preference Pane's Output tab just like the rest of your speakers.
The gear button hides a pop-up menu where you can set default input and output devices, and even set specific outputs for general audio and system sounds. Translation: You can use one set of speakers just for your Mac's alert sounds. You can do this, too, from the Sound Effects tab in the Sound Preference Pane.
All audio sources, including multi-output groups show up in the Sound Preference Pane
Volume Control On Multi Output Device For Mac Computer
Once your speakers and mics are set up just the way you want, it's OK to select them from the Sound Preference Pane if you don't feel like launching Audio MIDI Setup just to switch speakers. Think of Audio MIDI Setup as your super charged Sound Preference Pane.
Multi Output Device Mac Volume Control
With great power comes great responsibility, so use your new-found skills for good. Don't play crappy music. Life is too short for that.